NARGESA MX700, Instruction Book, Page: 15 / 41

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 14
Logically, if you press the ESCAPE key, the counter will not be affected, and return to the previous screen.
If instead you want to clear the counter to the question put to him in the previous message, press the
COUNTER key again. The new message is displayed like this on screen.
Picture 18. Information of the deleted counte
5.7. Desactivation of the machine
At any time the machine is turned on and it´s on rest position, you can turn it off. If this is what you want,
please press the OFF button and the machine will be disabled, going to standby (refer to Section 6.2)
5.8. Unusual performance situations
At any time an abnormal operating condition, a situation which by its description implies the stop of any
operation that was performed at that time may occur.
Abnormal situations are divided into two groups, the Emergency Situations and Error. The specific
situations that lead to each of these two groups are shown below
Emergency:
Activating the Emergency Stop button
Picture 19. Information about Emergency Stop
Error situations:
Error on the Upper Displacement of the machine.
Picture 20. Information about Error on the upper Displacement
Counter
deleted
EMERGENCY STOP
ERROR ON UPPER
DISPLACEMENT