NARGESA MX700, Instruction Book

Page: 8 / 41

INSTRUCTION BOOK HYDRAULIC PUNCHING MACHINE MX700 7
3. MAINTENANCE
3.1. General maintenance
Every 500 hours of use, check the oil level in the tank.
At the top of the tank is the oil plug. In case you need to add oil, fill to cover the peephole in the front of the
tank. (Picture 5)
- Replace every 2000 hours or every 5 years the hydraulic oil tank. Oil Type: CEPSA HYDRAULIC HM 68.
The tank has a capacity of 60 liters
Picture 5
WARNING:
Stop the machine and press the emergency stop to perform the oil change.
After replacing the oil, put up the machine and press the pedal in intermitencies increasing time pressure
gradually until the circuit fill up. Make sure the machine will perform normally.
- Lubricate punches periodically depending on use.
- If the use is daily and continuous, grease them every day.
- If the use is sporadic during the day then oil each week.
- If the use is sporadic, grease once a month.
Picture 6
1- Stop the machine
Oil filling cap
Oil level
Emptying cap