background image

English

21

16 Starting the Machine

16.1 Turning the Machine On

The machine is fitted with a safety device to prevent an acci-

dental start [2].

Push the safety [2] in, hold it in place and press the switch [1]. You 

can release the safety once the machine is running.

16.2 Turning the Machine Off

Release the switch [1]. The rundown time of the spindle is short‑

ened by a brake once the machine is off.

17 Work Instructions

Fasten the workpiece to a solid base.

Feed that is too high greatly reduces the performance of the tool 

and shortens the life of the saw blade and the motor. Use sharp saw 

blades suited for the given type of material. A thin oil film on the 

saw blade prevents rusting.
Clean the saw blade immediately after work. Glue and resin resi‑

dues reduce the quality of the cut.

17.1 Cutting Plastic

Cutting plastic creates long, spiral shavings. Electrostatic charge 

may cause the hole for chip extraction [15] to clog and the mova‑

ble guard [3a] to get stuck.
Workpieces made of plastic must make good contact with the 

base/supports underneath. Make careful cuts and work smoothly, 

steadily and without interruptions. This prevents the teeth from 

getting smeared with plastic and keeps the cut smooth and clean.

18 Maintenance and service

Attention! Risk of el. shock. Prior to start any opera-

tion, pull the plug out of the socket!

18.1 Instructions for Cleaning the 

Machine

Blow away dirt and dust from the tool’s vents when the motor is 

running. Use protective glasses when doing this. You can clean ex‑

terior plastic parts with a moistened cloth and a mild detergent. 

Though these parts are made of materials resistant to solvents, 

DO 

NOT

 use solvents to clean them.

Attention! With respect to protection from el. shock 

and preservation of the class of protection, all mainte-

nance and service operations requesting jig saw case 

removal must be performed by the authorized service centre 

only!

The current list of authorized service centres can be found at our 

website 

www.narex.cz

, section 

“Service Centres”

.

19 Accessories

The accessories recommended for use with this device are availa‑

ble commercially in the shops with hand el. tools.

20 Storage

Packed appliance may be stored in dry, unheated storage place 

with temperature not lower than ‑5 °C.
Unpacked appliance should be stored only in dry storage place 

with temperature not lower than +5 °C with exclusion of all sudden 

temperature changes.

21 Environmental protection

Power tools, accessories and packaging should be sorted for envi‑

ronmental‑friendly recy.

Only for EU countries:

Do not dispose of power tools into household waste!
According to the European Directive 2002/96/EC on waste electri‑

cal and electronic equipment and its incorporation into national 

law, power tools that are no longer suitable for must be separate‑

ly collected and sent for recovery in an environmental‑friendly 

manner.

22 Warranty

Our equipment is under warranty for at least 12 months with re‑

gard to material or production faults in accordance with national 

legislation. In the EU countries, the warranty period for exclusively 

private use is 24 months (an invoice or delivery note is required as 

proof of purchase).
Damage resulting from, in particular, normal wear and tear, over‑

loading, improper handling, or caused by the user or other dam‑

age caused by not following the operating instructions, or any 

fault acknowledged at the time of purchase, is not covered by the 

warranty.
Complaints will only be acknowledged if the equipment has not 

been dismantled before being sent back to the suppliers or to an 

authorised NAREX customer support workshop. Store the operat‑

ing instructions, safety notes, spare parts list and proof of purchase 

in a  safe place. In addition, the manufacturer’s current warranty 

conditions apply.

Note

Due to continuous research and development work, we re‑

serve the right to make changes to the technical content of this 

documentation.

23 Certificate of Conformity

EPK 18:

We declare that the device meets requirements of the following 

standards and directives.

Safety:

EN 62841‑1:2015
EN 62841‑2‑5:2014
Directive 2006/42/EC

Electromagnetic compatibility:

EN 55014‑1: 2017
EN 55014‑2: 2015
Directive 2014/30/EU

RoHS:

Directive 2011/65/EU

Place of storage of the technical documentation:
Narex s.r.o., Chelčického 1932, 470 01 Česká Lípa, Czech Republic

 2022

Narex s.r.o. 

 

Chelčického 1932 

Jaroslav Hybner 

470 01  Česká Lípa 

CEO of the company 

 

May 1, 2022

Summary of Contents for EPK 18



























































Reviews: