nardi SUNSTORM SFH1200, Use And Maintenance Manual

Page: 9 / 64

11
·
Be sure that operators and maintenance personnel are trained and informed about the contents of the manual
before putting the machine into operation or execution of maintenance.
·
A copy of this manual must be situated in an accessible place, always available for consultation. Keep this manual
for the entire period of the life of the machine.
·
The parts with mechanical stress such as twisting, stretching, rotation, especially belts, pulleys, couplings, hoses,
hoses should be checked regularly, must be free of defects and, if necessary, replaced according to the
instructions the manual of the machine.
·
Ensure that all protection are closed and attached to frame of the machine.
·
In the event of a prolonged stop of the machine, follow all procedures and precautions listed on the manual.
·
After a prolonged period of inactivity check the conservation status of the components in accordance with
standards given by the producer.
·
Before the re-start the machine it is important to check the conservation of the processing elements, components,
elements for transmission, and if not appropriate replace them.
·
Do not remove the license plates or any other decal installed on the machine. Make sure the plates are always
visible from the staff to control the operation of the machine.
It is forbidden any kind of reproduction, even partial, of this publication without the written consent of the company
Pegaso Srl.
CHANGES AND IMPROVEMENTS
The PEGASO S.r.l. looks to a constant improvement of its products and reserves the right to make changes in ways and
times that it considers necessary, without obligation for his part to carry them out on the machines previously sold.
01.02 WARRANTY CONDITIONS
Your SUNFLOWER HEADER is designed and built following the laws in force in your country and guaranteed according
to the contractual arrangements of the sale with the dealer. If you call directly the manufacturer, the warranty is valid only
if accompanied by fiscal documents (DDT and invoice), so this documentation must be preserved and exhibited in the
event of a claim under this warranty.
The machines are guaranteed for the months after the date of delivery.
The parts found defective will be replaced with a charge of transport costs.
The guarantee is not applicable in the event that:
1 . The sunflower header is used in an improper way.
2. Settings and maintenance were not performed according to the instructions in this manual.
3. Maintenance and / or repairs are performed by unauthorized personnel and therefore not qualified.
4. The causes are charged to transport for third parties.
5. Any anomalies caused by the use of parts or accessories "Not-original".
NOTE: The guarantee does not cover any kind of compromise for damages,
loss of earnings and any direct and / or indirect damages.
UK