nardi SUNSTORM SFH1200, Use And Maintenance Manual

Page: 30 / 64

32
To remove the header from the combine, proceed as follows:
1. Place the header on the trailer support (not supplied with the header).
2. Disconnect the PTO shaft.
3. Remove the retaining clips as shown in the use and maintenance manual of the combine .
4. Proceed to remove the header as specified by the user and maintenance manual of the combine.
05.03 Road circulation
In many countries there are specific rules governing : the circulation of these vehicles on the road
·
idth, length and maximum weight permitted without requiring authorization to the entity owner of the road. W
·
Maximum width and length allowed with circulation permissions of the road owner without car or pilot car
escort
·
Maximum speed allowable.
·
Use of lights, panels or signal flags for slow moving vehicle.
·
Additional signal of maximum encumbrance.
Before starting the engine of the combine to release the header, make sure that no
one is around the header.
Before you travel on a public road, please be informed about your local laws and
regulations.
DANGER!
DANGER!
UK