Spectrogram View
103
Changing general display settings (Display)
Here you can change general display settings such as the zero point of the Y-axis, the range
of the Y-axis or the axis unit (the available settings depend on the current view).
To open the Display menu:
You selected the desired view.
1.
Tap the
Display
button.
The
Display
menu opens.
2.
You can now do the following:
Lmax
Here you can do the following:
•
Set the zero level of the y-axis
•
Set the
Entry Mode
:
Absolute
or
Relative
•
Set the
Coupling
:
On
/
Off
(not available in
Level Meter
view)
When coupling is set to
On
, the views of a task are coupled (e.g. the axis).
To set the zero level:
1.
Tap the
Lmax
button.
2.
Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
3.
Press the
Esc
key to close the menu.
Settings in the Lmax context menu
⇒
Long tap the
Lmax
button.
The context menu opens.
Entry Mode
The
Entry Mode
button allows you to determine whether values are entered as absolute or
relative values.
To set the Entry Mode:
1.
Tap the
Entry Mode
button to select
Abs.
(Absolute) or
Rel.
(Relative).
2.
Press the
Esc
key twice to close the menus.
Coupling
The
Coupling
button allows you to couple the level axis of the views within a task.
Thus,
Coupling
is not available in the
Level Meter
view.
To set the Coupling:
1.
Tap the
Display
button.
2.
Long tap the
Lmax
button.
The Context menu opens.
3.
Tap the
Coupling
button to switch coupling
On
or
Off
.
4.
Press the
Esc
key twice to close the menus.
