EN
W415-2838 / A / 08.20.20
17
finishing
4.5 backerplate installation
A.
Install brackets (supplied) onto both sides of the appliance by inserting the hooks into the desired
appliance slots.
B.
Place the hooks on the backerplate into the slots in the brackets previously installed in step A
(Fig. 4-8)
.
4.6 logo placement
Brackets are asymmetrical. During installation, ensure the top tabs face forward
(Fig. 4-7)
.
note:
Fig. 4-7
Fig. 4-8
Fig. 4-10
NOTE:
Top
tabs
face
forward
Hook
Slot
Hook
Slot
Fig. 4-9
Blower Air
Channel
1/2”(13mm)
1/2”(13mm)
Backerplate
C.
Adjust the blower air channel by sliding it forwards or backwards
(Fig. 4-9)
.
D.
Fasten the blower air channel in place by installing 2 screws (supplied)
(Fig. 4-10)
.
Door removed for
clarity.
Remove the backing of the logo supplied and place, as illustrated.