W415-1476 / C / 10.03.17
20
EN
5.3 BRICKS AND BAFFLE INSTALLATION
!
WARNING
OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE TEMPERATURES
THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING ENCLOSURE.
With appliance and chimney installation completed, move the bricks into place for your appliance as
illustrated.
A.
Install the bottom bricks, working from the back of the appliance forward.
B.
Before installing the back bricks, loosen the screw holding the brick retainer and ensure that it has
been moved forward. Install the six bricks along the back wall by pivoting the bricks up under the
brick retainer. Re-tighten the screw.
C.
Install the first two rows of side bricks as shown in the illustration below.
D.
Pivot the fibre baffles into place with the brick retainer edge down and toward the outside of the
appliance. Slide the top row of bricks into place to support the baffle. The baffle must sit flat on the
outside row of bricks as well as the flange on the manifold shield. Push the baffle all the way to the
rear of the firebox, leaving a minimum of 1” (25mm) gap along the front. This will allow flue gases to
escape the firebox.
E.
Install the remaining bricks along the front opening, as illustrated below.
NOTE: Do not operate without the bricks, baffle and manifold shield are not in position.
All Firebricks are 1 1/4” (32mm) Thick
A
A
A
A
A
A
A
A
A
A
A
A
A
D
D
B
B
C
C
E
F
I
J
G
NOTE: BRICKS
E & F ARE
NOTCHED AT
REAR.
H
(Fibre Baffles)
W018-0077 X2
BRICK
RETAINERS
RETENUE
DU BRIQUE
K
A
A
A
A
A
A
A
A
A
A
A
A
D
D
B
B
C
E
F
I
J
G
E
F
NOTE:
BRIQUES E & F
SONT ENTAILLÉ
À ARRIÈRE
H
(Déflecteurs
en Fibre)
W018-0077 X2
E
F
K
K
A
C
K
K
K
S1
D
D
A
A
(
Déflecteur en Fibre
)
W018-0078 X2
RETENUE
DU BRIQUE
A
A
A
A
A
A
A
A
A
A
A
B
B
E
F
I
J
G
F
NOTE: BRICKS
E & F ARE
NOTCHED AT
REAR.
H
(Fibre Baffles)
W018-0078 X2
BRICK
RETAINERS
A
A
A
A
A
A
D
D
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
E
F
I
J
G
H
A
A
A
A
A
A
NOTE: BRIQUES
E & F SONT ENTAILLÉ
À L’ARRIÈRE
E
F
E
K
K
K
K
K
K
S4
FIREBRICK
DIMENSIONS
PART #
FIREBRICK
DIMENSIONS
PART #
S1
S4
S1
S4
A
4 1/2” x 9”
(114mm x 229mm)
W090-0001
X12
W090-0001
X18
G
2 1/4” x 9”
(57mm x 229mm)
W090-0018
X1
W090-0018
X1
B
3” x 9” (Molded)
(6mm x 229mm)
W090-0002
X2
W090-0002
X2
H
1 3/4” x 4 3/4”
(64mm x 121mm)
W090-0216
X1
W090-0216
X1
C
4 1/2” x 4 1/2”
(114mm x 144mm)
W090-0003
X2
N/A
I
2 1/2” x 4 1/2”
(64mm x 114mm)
W090-0016
X1
W090-0016
X1
D
3” x 9”
(76mm x 229mm)
W090-0166
X2
W090-0166
X2
J
1 1/2” x 4 1/2”
(38mm x 114mm)
W090-0017
X1
W090-0017
X1
E
4 1/2” x 9”(Notched)
(114mm x 229mm)
W090-0207
X1
W090-0207
X1
K
4 1/2” x 8 1/2”
(114mm x 216mm)
W090-0210
X3
W090-0210
X3
F
4 1/2” x 9”(Notched)
(114mm x 229mm)
W090-0208
X1
W090-0208
X1
