background image

2

TOOLS AND PARTS NEEDED FOR ASSEMBLY

TOOLS NEEDED:

7/16   Wrench

3/8   Open End Wrench
Adjustable Wrench

Philips Head Screwdriver
Leak Detection Solution ( Instructions page 9 )

"

"

WARNING

Note: 20 Pound, 5 Gallon LPG Tank is not supplied.

For outdoor use only.

Cylinders to be used must be constructed and marked

in accordance with US DOT specifications.

The unit should be secured or moved indoors if winds

exceed 35 km/h.

Storage indoors is permissible only if the cylinder

is removed.

WARNING: 

   Improper installation, adjustment,

alteration, services or maintenance can cause injury,

death or property damage.    

Read the installation, operating and maintenance

instructions thoroughly before installing or servicing 

this equipment.

DANGER

CARBON MONOXIDE HAZARD

This appliance can produce carbon monoxide
which has no odor.

Using it in an enclosed space can kill you.

Never use this appliance in an enclosed space such
as a camper, tent, car or home.

The bill of sale or copy will be required together with the serial and model numbers when making any warranty claims from NAC. Do not
return parts to our address without first obtaining a return authorization number. The customer service department is available between
9AM and 5PM (EST).

NAC Customer Care

 

214 Bayview Drive
Barrie, ON
Canada, L4N  4Y8
1-866-820-8686
1-705-727-4282 (fax)

[email protected]

Summary of Contents for PTHC38PK















Reviews: