Napoleon PRO285, User Instructions

Page: 14 / 20

www.napoleongrills.com
14
WARNING!
Hose: Check for abrasions, melting, cuts, and cracks in the hose. If any of these
conditions exist, do not use the gas grill. Have the part replaced by your Napoleon Gas Grill dealer or
qualified gas installer.
WARNING!
When reinstalling
the burner after cleaning it is very
important that the valve/orifice
enters the burner tube before lighting
your gas grill. If the valve is not inside
the burner tube a fire or explosion
could occur.
Cast Aluminum Lid: Your grill is equipped with a cast aluminum lid which will not rust and can easily
be refinished. The inside of the lid is raw aluminum, flow marks and releasing agent marks may be
present, this is not a defect but marks from the mold which is used in the manufacturing process.Clean
the lid periodically with warm soapy water. Although cast aluminum will not rust, high temperatures
and weathering can cause oxidation to occur on aluminum surfaces. This appears as white spots on
the casting. To refinish these areas, clean first and sand lightly with fine sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from
over-spray. Follow the manufacture’s directions for curing.