Napoleon PRO285, User Instructions

Page: 11 / 20

www.napoleongrills.com
11
Lighting Instructions
Burner Control
WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Slowly turn on the gas supply valve.
Main Burner Lighting
1. Open grill lid
2. Push and turn any main burner control knob slowly to the 'hi' position. This action will ignite the
selected burner.
3. If the burner does not ignite, then immediately turn the control knob back to the 'off' position and
repeat step 2 several times.
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'off' position and wait 5
minutes for any excess gas to dissipate, either repeat steps 2 and 3 or light with a match.
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit match
down through the grill while turning the corresponding burner valve to high.
WARNING!
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames and low heat will be achievable.