W415-1710 / B / 08.17.18
EN
42
venting installation
The vent shield is telescopic and must be adjusted to shield the first 30” of vertical vent always used.
FOR SEE-THRU APPLIANCES, REPEAT STEPS WITH THE OPPOSITE SIDE (2 vent shields required)
Fig. 1
Fig. 2
Fig. 3
1. Loosen the fasteners on the vent shield assembly. DO NOT DISCARD FASTENERS
(Figure 1)
.
2. Adjust vent shield to its maximum vertical
(Figure 2)
.
3. Tighten the fasteners to lock the vent shield height
(Figure 3)
.
4. Remove the fasteners as shown
(Figure 4)
. DO NOT DISCARD FASTENERS
5. Align the vent shield with the holes and replace above screws
(Figure 5)
.
6. Secure the vent shield with two fasteners (supplied) to the front upper frame
(Figure 6)
.
note:
6.7 vent shield installation
Fig. 4
Fig. 5
Fig. 6
SEE-THRU EXAMPLE
# 1 (x2)
For ease of installation, the front frame can be removed. The front frame must be
reinstalled prior to installing the nailing tabs.
important:
Front of
appliance