8
WS-415-131 / A / 09.11.00
FINISHING
LOG PLACEMENT
POSITIONING THE LOGS IMPROPERLY WILL CAUSE
FLAME IMPINGEMENT AND CARBONING.
Log colours
may vary. During the initial use of the fireplace,
the colours will become more uniform as colour pigments
burn in during the heat activated curing process.
1.
Place the back log onto the log support bracket,
located on the rear wall of the combustion chamber, push-
ing it as close to the firebox wall as possible. CENTRE it.
2.
& 3.
Centre the front log, as shown. The underside
of the log contains two cavities which are placed over the
locating screws on the burner.
4.
Set the two smaller logs into the pockets and
grooves of the front and back logs, respectively.
HOOD
The curtain mesh must be kept fully closed during opera-
tion to help prevent accidental burns from occurring.
The heater must not be used when the hood is re-
moved.
Hook the hood over the lip of the curtain support
plate.
OPTIONAL LOUVRE INSTALLATION &
REMOVAL
The louvres are in-
stalled as illus-
trated.
Ensure that the
upper louvres
snap into place.
This will ensure
proper air flow.
The lower louvre
assembly is fas-
tened by two
screws securing
the hinges on either
side to the heater
base.
1
2
3
4
HOOD
CURTAIN
MESH
UPPER LOUVRES
LOWER LOUVRES
(VALVE CONTROL DOOR)
FIGURES 11
FIGURE 12
FIGURE 13
FIGURES 14