29
W415-0777 / 03.02.09
5.3 L42 LOUVRE INSTALLATION
A
B
A
B
SLOT
TAB
SLOT
HINGE
CLIP
57.1
UPPER LOUVRES
Insert the louvre tabs into the slots
located at the top left and right corners of
the unit.
LOWER LOUVRES
Insert the hinge clips into the slots lo-
cated at the bottom left and right corners
of the unit.
To remove the louvres, pull the back tabs
of the clips forward, while pushing the
louvre assembly back. Lift the clip.
5.4 LOGO
PLACEMENT
Remove the backing of the logo supplied and place on the glass view-
ing door, as indicated.
5.5.1
Remove the upper louvres, and open the
glass door. Remove the logs.
5.5.2
Remove the two securing screws located
on either
fi
rebox side.
5.5.3
Place the left panel against the left side
of the
fi
rebox, ensuring that it butts up to
the rear panel. Secure in place using 2 of
the screws previously removed. Repeat for the
right side.
5.5.4
Replace the logs, glass door and louvres.
5.5 PORCELAIN REFLECTIVE PANELS
FIGURE 5.3
FIGURE 5.4
FIGURE 5.5.2
FIGURE 5.5.3
LOGO
1/2”
1/2”
