31
W415-0779 / A / 04.27.10
The grate for this
fi
replace has been removed for shipping purposes.
The grate must be installed before the logs are installed.
Remove the packaging from the grate and install onto the two pins as
illustrated.
GRATE
PINS
6.4 GRATE
INSTALLATION
6.5 LOG
PLACEMENT
PHAZER
TM
logs and glowing embers, exclusive to Napoleon®
Fireplaces, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colours may vary. During the initial use of the
fi
replace, the colours will become
more uniform as colour pigments burn in during the heat activated curing process.
6.5.1
Place the cutout in the bottom of log #1 behind
the pilot assembly. Rest the log against the back
wall of the
fi
rebox.
6.5.2
Move the two small logs (#2 & #3) into
position, lining up the studs located on the
burner with the holes on the bottom of the logs.
6.3 DOOR
TRIM
This appliance comes complete with top door
trim (W715-0729).
6.3.1
Guide the arms of the trim into the slots
that are slightly hidden under the facing
through the opening between the top
of the door and the bottom edge of the
facing as illustrated in the front view.
6.3.2
Slide the arm into the slot far enough to
allow the front edge of the trim to go in behind the facing.
6.3.3
Let the bracket come forward towards the back of the facing and allow
the trim to rest on the inside lip, this position will allow the notch on the
arm of the trim to fall into place on the edge of the slot.
NOTCH
INSIDE LIP
S
E
E
-T
H
R
U
W
IN
D
O
W
BGD42CF SIDE VIEW
BGD42CF WITH TOP DOOR TRIM INSTALLED
SLOT
TRIM
FACING
DOOR
BGD42CF FRONT VIEW