47
W415-1293 / 08.10.15
EN
6.3 LOG
PLACEMENT
PHAZER
TM
logs and glowing embers exclusive to Napoleon, provide a unique and realistic glowing effect that is
different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect.
Log colours
may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A
C.
Place the right log (W135-0545) onto the two
studs located on the right side of the log
support.
D.
Place the left crossover log (W135-0546) onto
the pin located in the left side of the rear log,
allow it to rest in the notch of the left log.
B
A
C
B
A
C
D
A.
Place the rear log (W135-0620)
fi
rmly onto
the two studs located at the rear of the
support tray. Ensure the log sits
fl
at and
does not cover the pilot opening. Place two
pins in holes located on the top of the rear
log.
B.
Place the left log (W135-0544) onto the two
studs located on the left side of the log support.
B
A
A
PIN
PIN
PINS
Summary of Contents for B42NTRE
Page 71: ...19 0 SERVICE HISTORY...