17
F I R E P R O T E C T I O N
(Applicable only where local ordinance permits use of this alarm system for fire protection)
Fire-Zone Alarm
If a fire is detected, "
FIRE ALARM
" will be displayed and the Hub sounder will pulse. In addition,
the FIRE icon will flash.
1.
If a fire is in progress, evacuate the premises immediately! If necessary, call the
Fire Department from an outside telephone.
2.
Tap
RESET
to silence the sounder and reset the alarm.
NOTE:
When the Fire Zone is reset, the FIRE icon on the display will go out. If
the FIRE icon is still displayed, the fire zone has not been properly reset. If you cannot clear this
condition by tapping
RESET
, call for service.
Fire-Zone Trouble
1.
If a problem in the fire-circuit is detected, "
FIRE TROUBLE
" and the zone number will display
and the sounder will pulse to signal a malfunction. The "System Trouble" icon will flash accom-
panied by the audible message, "System has detected trouble condition".
2.
Tap
RESET
to silence the sounder. Call for service immediately!
Note:
When
the fire trouble clears, the Hub will reset automatically.
F I R E A L A R M
F I R E T R O U B L E
(TROUBLE Icon)
(FIRE Icon)
RESET
RESET
