background image

1

No: IS-00722  Rev. 2

Vantage

®

Equinox 73-III LCD In-Wall Touchscreen
French Description
Spanish Description

Installation Instructions • Instructions d’Installation • Instrucciones de Instalación

No: IS-00722 – rev. 2

EQ73TB-TI-III • Les Nombre de Catalogue • Los Números de Catálogo: 

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

FEATURES AND OPERATION OVERVIEW

OVERVIEW

Vantage’s Equinox 73-III (third generation) active matrix LCD touchscreen continues 

the Vantage commitment to LCD in-wall control centers. The Equinox 73-III LCD 

Interface is a dedicated system portal to whole home control. The 7” touchscreen 

displays media rich widgets in a dashboard layout. Each widget’s content has been 

carefully designed to provide the ultimate user experience. Navigate and control, with 

real time feedback, lighting, audio, climate, weather, and more through a single layer 

navigation experience. For additional personalization and control, individual widgets 

may be edited directly from the touchscreen.

• 

Widescreen orientation only

• 

Equinox 73-III has a fast 4-core processor

• 

Equinox platform provides built-in widgets using Vantage proprietary auto discovery widgets for fast automatic screen design

• 

Equinox 73-III fully incorporates Vantage’s consistent user experience interface, eliminating learning curves normally associated 
with switching interface devices

• 

Power: PoE+ 

• 

Communicates over Vantage Ethernet Bus (InFusion controller and Equinox should be connected to the same local network)

• 

Firmware upgradable from Design Center over Ethernet.

• 

Built-in ambient light sensor for “active,” AUTO mode screen brightness and off when dark option when “inactive”

• 

Inactive mode dims or turns screen off in 1 to 10 minutes (adjustable) if no activity

• 

Built-in proximity activation, 6” maximum, may be programmed to execute a task with a hand wave across front of station

• 

Displays three widgets at a time

• 

Mechanical buttons, bottom left and right;

 

- Left  navigates to home screen position

 

- Right  may be assigned to a programmed task

• 

Profiles / Settings; personalize dashboard level and hardware settings:

 

- Select settings / dashboard, to arrange order of widgets which widgets to display

 

- Select options to select language*, 12/24 hour clock, and fahrenheit/celsius temperature display

 

- *Supported languages: Arabic, Chinese (simplified), Dutch, English, French, German, Hebrew, Italian, Japanese, Korean, 

 

  Portuguese, Russian, Spanish

 

- Select 

device

, to view and set hardware settings, system information, network settings, reset user settings, and view 

 

  additional information settings

 

- Select profiles, to create, delete, or rename profiles

• 

Equinox 73-III uses the same widgets as Android tablets and phones, and iPads, iPhones, and iPods

• 

Top of screen displays:

 

- (left) Icon for current weather conditions and temperature, via Vantage weather service

 

- (center) Time of day

 

- (right) Selected profile

Summary of Contents for Vantage Equinox 73-III









Reviews: