7
"display" to provide visual output from the StarLink Connect Z-Wave controller. For the purposes of this manual, all
references to the app will refer to both the app itself or the StarLink Connect Z-Wave controller module (see WI1980
for more information).
Include:
Add a device or controller to your home automation network.
Exclude:
Remove a device or controller from your home automation network.
Node ID:
Used to identify and manage individual nodes in a network; each ID is unique within a network.
Node Information Frame:
Describes the abilities of a node, allowing the controller to identify and control the
various node types available. All nodes automatically send their Node Information Frame when a button on the node
is pressed; those controllers in need of the Node Information Frame are programmed to request it automatically
when needed.
"Event-Action" Configuration Table:
Used to associate security alarm system events to your home automa-
tion system. For example, a burglary alarm triggers certain lights to turn on.
Rebuild Mesh:
A manual request to redesign the Routing Table to increase communication efficiency
(accelerate response times). Usually performed after physical changes are made to the network, such as after home
construction projects or other physical changes to the premises that might affect communications within the network.
Abort:
Exit a function or task without saving changes.
Erase All Devices:
Deletes all nodes (devices and controllers) from the network.
Note:
Devices must still be
removed individually if you wish to re-enroll them later.
Group:
A collection of switches and dimmers that can be displayed together for ease of access.
Scene:
Several devices in your network pre-set to a specific condition.
Beaming:
Non-AC (battery) powered Z-Wave appliances (such as battery operated door locks, thermostats, etc.)
must be beamed a "wake up" command to carry out subsequent commands from the Z-Wave controller. This
"beaming" command emanates from the Z-Wave controller and must be "beamed" from one node to another until the
A U T O M A T I O N O V E R V I E W ( C O N T ' D )
