NAPCO Gemini C
-
Series Control Panel Installation Instructions
--
Volume 3
Installation Instructions, Volume 3
Page 23
FCC STATEMENT
This equipment generates and uses radio
-
frequency energy and, if not installed and used properly,
that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and
television reception. It has been type tested and found to comply with the limits for a Class
-
B compu-
ting device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are de-
signed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: reorient the receiving antenna; relocate the computer with respect
to the receiver; move the computer away from the receiver; plug the computer into a different outlet
so that computer and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for ad-
ditional suggestions. The user may find the following booklet prepared by the Federal Communica-
tions Commission helpful: "How to Identify and Resolve Radio
-
TV Interference Problems". This
booklet is available from the U.S. Government Printing Office, Washington, DC 20402; Stock No.
004
-
000
-
00345
-
4.
CAUTION:
This equipment generates and uses radio
-
frequency energy. If not installed using con-
ventional installation practices for RF devices, it may cause interference to radio and television re-
ception. It has been tested and found to comply with the limits for a Class A computing device pursu-
ant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference. However, there is no guarantee that interference will not occur in a partic-
ular installation. If it has been found to cause interference to radio or television reception, which can
be determined by removing and reapplying AC and battery power to the equipment, the installer
should try to correct the interference by one or more of the following measures: reorient the receiving
antenna; connect the power transformer to a different outlet so that the control panel and receiver
are on different branch circuits; relocate the control panel with respect to the receiver.
Warning:
The use of non
-
NAPCO wireless devices with this control panel has not been evaluated
by UL and voids the UL listing. In addition, the performance of these devices can not be guaranteed
as compatible with NAPCO control panels. UL Listed to UL864 9
th
Edition when used in conjunction
with GEMC
-
Series and other UL 864 9
th
edition Control Units as specified in the Control Unit Installa-
tion Instructions.
