NAPCO Gemini C
-
Series Control Panel Installation Instructions
--
Volume 3
Page 2
Installation Instructions, Volume 3
NAPCO Security Technologies, Inc.
333 Bayview Avenue, Amityville, New York 11701
For Sales and Repairs, call toll free: (800) 645
-
9445
For direct line to Technical Service, call toll free: (800) 645
-
9440
www.napcosecurity.com
Refer to accompanying Gemini C
-
Series Control Panel Programming Instructions (WI1673 volumes 1 and 2)
for programming information.
Contact your Local Service
Representative:
_________________________
_________________________
_________________________
_________________________
DISCLAIMER
NAPCO Security Technologies, Inc. (NAPCO) makes no representations or warranties with respect to the contents
hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Further, NAPCO reserves the right to revise this publication and to make changes from time to time in the content
hereof without obligation of NAPCO to notify any person of such revision or changes.
Information furnished by NAPCO is believed to be accurate and reliable. However, no responsibility is assumed by
NAPCO for its use; nor for any infringements of other rights of third parties which may result from its use. No li-
cense is granted by implications or otherwise under any patent or patent rights of NAPCO.
Microsoft
®
and Windows
®
are registered trademarks of the Microsoft Corporation.
All other trademarks cited in this manual are for reference only and are the property of their respective owners.
Copyright © 2021 by NAPCO Security Technologies, Inc.
This document contains proprietary information of NAPCO. Unauthorized reproduction of any portion of this manu-
al without the written authorization of NAPCO is prohibited. The information in this manual is for informational pur-
poses only. It is subject to change without notice. Companies, names and data used in examples herein are ficti-
tious unless otherwise noted. NAPCO assumes no responsibility for incorrect information this manual may contain.
For systems that include CO detectors, the system must be monitored by a central station.
NAPCO Security Technologies, Inc., 333 Bayview Avenue, Amityville, New York 11701
Publicly traded on NASDAQ Symbol: NSSC
Visit our website at http://www.napcosecurity.com/
For Sales and Repairs
-
(800) 645
-
9445
Fax: 631
-
789
-
9292
THIS MANUAL INCLUDES FEATURES WHICH ARE ONLY AVAILABLE IN CONTROL
PANEL FIRMWARE VERSION 90 OR LATER, AND REFLECTS THE FEATURES FOUND IN
PCD
-
WINDOWS QUICKLOADER DOWNLOAD SOFTWARE VERSION 6.3.2 OR GREATER.
Important:
To minimize the possibility of crosstalk, care should be taken when running digital communication circuits (for example, 12V
digital keypad bus wiring, Burg SLC and Fire SLC circuit wiring) in close proximity to each other, such as within multi
-
conductor cables or
the same conduit over long distances. All wiring must comply with the NEC (National Electrical Code) and/or NFPA 70 codes.
