DSD14
2
Rev. 03/01/12
This insTrucTion Manual conTains iMporTanT safeTy inforMaTion.
read This insTrucTion Manual carefully and undersTand all inforMaTion Before
operaTing This Tool.
• Always wear impact-resistant eye and face protection when operating or
performing maintenance on this tool.
• Keep the tool in efficient operating condition.
• Keep body working stance balanced and firm. Do not overreach when
operating the tool.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace damaged labels.
• Communications port is for use by authorized service
center technicians only.
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
WARNING - FOLLOW THESE RULES FOR SAFE OPERATION!
WARRANTY
SPECIFICATIONS
DIGITAL TORQUE WRENCH - LIMITED 12-MONTH WARRANTY
Carlyle Professional Hand Tools warrants to the original purchaser that the company’s digital torque wrenches are free from
defects in material or workmanship during the one year warranty period. We will repair any digital torque wrench which fails
to give satisfactory service due to defective workmanship or materials (excluding calibration) for 12 months from the date
of original purchase. (Calibration is only covered by this warranty for each new unused torque wrench out of box.) Products
must be returned with proof of purchase, freight prepaid, to the warranty service center listed below..
This warranty excludes torque wrenches which have been subjected to abnormal use, accident, neglect, or lack of
maintenance. Any modification, disassembly of this wrench or repair by an unauthorized service center will void the
warranty. This warranty gives you specific rights. You may also have other rights which vary from state to state.
The foregoing obligation is Carlyle Professional Hand Tools sole liability under this or any implied warranty and under no
circumstances shall Carlyle Professional Hand Tools be liable for any incidental or consequential damages.
Note:
Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you.
For Warranty Service and Recalibration/Certification Services, contact:
Torque Wrench Repair Facility
315 Hawkins Rd.
Travelers Rest, SC 29690
Phone: 866.496.8423
Fax: 864.834.6651
Notes from Page 1:
*1: The accuracy of the readout is guaranteed from
20% to 100% of maximum range + /- 1
increment. The torque accuracy is a typical
value. Calibration point is in the center of rubber
grip (with marking). For keeping the accuracy,
calibrate the screwdriver for a constant period
time (1 year).
*2: Use one AAA batterry (Test condition:
Toshiba carbon-zinc battery)
*3: Horizontal and vertical test.
*4: One cycle means twist the screwdriver from
0 cN-m to maximum range and back to 0 cN-m.
*5: Environmental test:
a. Dry heat
b. Cold
c. Damp heat
d. Change of temperature
e. Impact (shock)
f. Vibration
g. Drop
*6: Electromagnetic compatibility test:
a. Electrostatic discharge immunity (ESD)
b. Radiated susceptibility.
c. Radiated emission
