Napa 791-6022 Operating Manual & Parts List Download Page 2

791-6022 

rev. 03/14/17

WARNING INFORMATION

This is the safety alert symbol. It is used to alert you 
to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible 
injury or death.

            IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING 
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsiblity of 
the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost 
or not legible, contact NAPA for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to 
and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator 
comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical means, but only by the 
exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the use and operation 
of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its proper use. Examples of 
hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, off-centered loads, use on 
other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

 

•  Read, study, understand & follow all instructions before using.

 

•  Inspect the jack before each use.  Do not use if damaged, altered, modified, in poor condition, leaking hydraulic fluid or 

unstable due to loose or missing components.  Make corrections before using.

 

•  Use of this product is limited to lifting, lowering, transporting/storing (only in the lowered position) ATV's and motorcycles with 

exposed frame undercarriages.

 

•  Use only on a hard level surface.

 

•  Keep operator's and bystander's head, hands and feet away from lift arms when raising and lowering.

 

•  User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.

 

•  Do not use jack beyond its rated capacity.  Do not shock load.

 

•  Center load on lift platform.  Secure load with appropriate restraint device.

 

•  Immediately after lifting a load, ensure lift's mechanical load-holding means are engaged.

 

•  Lift only on areas of the vehicle as specified by the vehicle manufacturer.

 

•  Before moving, lower the load to the lowest possible point.

 

•  Restraining an incompatible load will not make the load secure and may cause unexpected loss of load.

 

•  Never work on, around or under a load that is not secure and stable.

 

•  Only attachments, restraints or adapters supplied by NAPA shall be used.

 

•  Always lower the jack slowly and carefully.

 

•  No alterations shall be made to this product.

 • 

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 

Wash hands thoroughly after handling.

 

•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS
could cause accidents resulting in serious or fatal personal injury and/or property damage.

WARNING: Indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

WARNING

WARNING

WARNING

WARNING

OPERATING MANUAL & PARTS LIST FOR 791-6022

Summary of Contents for 791-6022














Reviews: