background image

791-2246, 791-2247 

03/11/18

PREVENTATIVE MAINTENANCE

 

This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential  
personal injury hazards . Obey all instructions to avoid possible injury or death .

 

IMPORTANT:

 Any jack found to be defective as a result of worn parts due to lack of lubrication, or hydraulic system  

contaminated with water, rust and/or foreign materials is not eligible for warranty consideration .

1 .  Always store the jack in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust, or any 

other harmful elements . The jack must be cleaned of sand, grit, oil, grease or other foreign matter before using .

2 .  The jack must be lubricated periodically in order to prevent premature wearing of parts . A general purpose grease must be applied to the 

threads on the extension screw . Do not lubricate any portion of the lift saddle and make sure the saddle is free from grease, any kind of 
lubricant, or debris before using the jack .

3 .  It should not be necessary to refill or top off the reservoir with hydraulic fluid unless there is an external leak . An external leak requires 

immediate repair which must be performed in a dirt-free environment by qualified hydraulic repair personnel who are familiar with this 
equipment . Authorized Service Centers are recommended . 

IMPORTANT:

 In order to prevent seal damage and jack failure, never use  

alcohol, hydraulic brake fluid, or transmission oil in the jack . Use NAPA hydraulic Jack Oil #765-1541 .

4 .  Every jack owner is responsible for keeping the jack label clean and readable . Use a mild soap solution to wash external surfaces of the 

jack but not any moving hydraulic components .

5 .  Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with this equipment .

TROUBLESHOOTING

 PROBLEM 

ACTION

  1 . Unit will not lift rated load . 

Purge air from hydraulic system by following procedure under SETUP .

  2 . Unit will not sustain rated load or feels "spongy" 

  under rated load . 

Purge air from hydraulic system as above .

  3 . Unit will not lift to full height . 

Purge air from hydraulic system as above or check oil level in reservoir .

  4 . Unit still does not operate . 

For a complete list of authorized hydraulic repair centers, 

Please contact your local NAPA Auto Parts Store for details on warranty.

WARRANTY

OPERATING MANUAL & PARTS LIST FOR 791-2246, 791-2247

Summary of Contents for 791-2246















Reviews: