EN
4. Removing the front panel
To remove the front panel, simply hold the
cut-out at the bottom of the front panel and
pull it towards you with a firm tug.
Please note that the cables of the I/O-panel
are guided through the front into the chassis,
so please be careful when removing the
front.
vertically in the frame and secure them on both sides with the 2.5 inch mounting screws (long).
Then push the frame with the hard drives into the HDD cage in the position you prefer.
If you plan to put the frame in the additional 3-bay HDD-cage, we recommend connecting the
SATA power and data cables, before pushing the mounting frame back into the cage and then
guide the cables through the appropriate cable guides in the motherboard tray.
10
Summary of Contents for Deep Silence 5 Rev. B
Page 1: ......
Page 18: ...Nanoxia 2015...
