background image

III. Support

Dear customer,

The PC case you purchased has undergone a very thorough quality control. Nevertheless, 

should there be any unexpected problems with your case we ask that you first approach the 

dealer where you purchased the product. They are prepared to assist you with competent and 

uncomplicated advice and practical support.

 

 If perhaps a few screws were missing or you might have a question that can’t be answered by 

this manual, please do not hesitate to contact us directly by e-mail.

 

Likewise, we would appreciate your suggestions and comments about our case very much. Our 

staff will respond to all inquiries quickly and professionally.

 

Customers from Germany and the European countries can use the following e-mail address 

for support questions, spare parts or warranty issues:

 

[email protected]

 

Customers from Africa, Asia, Australia as well as North and South America can use the 

 

following e-mail address for support questions, spare parts or warranty issues:

 

[email protected]

 

For general inquiries, comments, suggestions and the like please refer to: 

 

[email protected]

 

We are sure that you will be satisfied with Nanoxia CoolForce 2 for many years to come, so 

please enjoy your new PC case. 

Your Nanoxia Support-Team

15

Summary of Contents for CoolForce 2


















Reviews: