Nanoxia CoolForce 2 Instruction Manual Download Page 13

Page: 13 / 17

7. The 3-stage fan controller

The CoolForce 2 is equipped with a 3-stage fan control for up to three fans.

7.1 Connecting the fans to the fan control

The fan controller is powered by a SATA power-connector that is connected directly to the

power supply. The controller offers three 3-pin connectors for fans.

The fan controller is not designed for the operation of powerful fans. Please take this into

account in particular when using fans from other manufacturers. The maximum power must

not exceed 9 watts.

7.2 Operation of the fan control

The sliders for controlling the fans controller

can be found at top of the case front. You

can choose between Low – Medium – High

settings and thus adjust the speed of the

preinstalled fans according to your needs.

8. The Nanoxia Rigid LED Bars

Behind the front of your CoolForce 2 case two green-lit Nanoxia Rigid LED Bars are pre-installed.

8.1 Connecting the Rigid LED Bars to the power supply

The Rigid LED Bars are powered by a 3-pin Molex connector that can be connected directly to

the power supply or a separate fan control.

Summary of Contents for CoolForce 2

















