2 - User interface
2 -
User interface
Main screen
1. START frequency
2. STOP frequency
The START frequency and STOP frequency are shown at the bottom of the display.
3. Marker
The marker position for each trace is displayed as a small numbered triangle. The selected marker can be
moved to any of the measured points in the following ways:
•
Drag a marker on the touch panel – best to use a stylus for this.
•
Press and hold the
or
buttons.
◀
▶
4. Calibration status
Displays the saved slot number of the calibration being used and the error correction applied.
•
C0 C1 C2 C3 C4 : Each indicates that the corresponding calibration data is loaded.
•
E : Indicates that enhanced response calibration is enabled.
•
S O L T : Each indicates that the corresponding (Short, Open, Load, and Thru) standards have been
measured.
VNA6000 User Manual 2022/08
5