1 - Introduction
First steps
What’s in the box
The following items should be in the box:
•
VNA6000 main unit
•
USB cable
•
Touch screen stylus
•
2 SMA connector savers
•
(Optional) 5 SMA calibration standards – Short, Open, and 2 Load standards
•
(Optional) 2 SS405 or SS402 SMA male to male cables
SMA connector savers
Before using the VNA6000 for the first time, it is recommended to attach the two SMA connector savers to
the two ports of the VNA and keep it attached. This will eliminate wear on the VNA main unit connectors
and extend the service life of the VNA6000.
Battery
The VNA6000 includes battery management and protection circuitry. It can both charge and run from an
internal lithium-ion battery.
If your VNA6000 did not come with the battery preinstalled due to shipping restrictions, you can insert a
standard 18650 size flat-top unprotected lithium-ion cell. Running directly from USB power without a
battery installed is also supported.
VNA6000 User Manual 2022/08
4