Motor User Manual
Motor Installation
Nanomotion Ltd.
18
Mounting and Connecting the EDGE Motor
4.3
In order to mount the motor against the moving slide (see Figure 2 and chapter
perform the following steps:
Figure 2: EDGE motor motion system mechanical parts overview
Assemble the slide with the ceramic strip upon the mounting plate. Make sure the
slide position is according to Figure 16. The slide should be perpendicular to the
holes and at the correct distance to enable proper mounting of the motor. This
can be achieved by designing an alignment feature in the base plate or by using
a jig which fits to the motor pin holes in the base.
Place the motor “fingertip” against the ceramic plate and gently press the
1.
motor toward the ceramic plate until the motor pins can be inserted into the
corresponding holes in the base. The motor is now correctly positioned.
Insert two M1.2 screws into their corresponding holes on the motor and
2.
tighten them to a torque of 10-30 mNm. The motor is now properly secured in
