ADAM-rWBC2, residual Leukocyte Counter
27
Consignes de securite
Examinez et suivez les consignes de securite ci-dessous :
N’installez pas l’instrument dans un endroit humide comme une serre ou un incubateur pour eviter un
risque de choc electrique. Si de l’eau ou tout autre materiau penetre dans l’instrument, l’adaptateur, ou
l’entrees d’alimentation, debranchez le cordon d’alimentation et contactez un technicien de service. Pour
l’environnement d’exploitation, reportez-vous aux specifications du produit.
Ne touchez pas la fiche ou le cordon d’alimentation principale avec les mains mouillees.
Assurez-vous toujours que la tension d’entree d’alimentation correspond a la tension disponible dans
votre endroit.
Cet instrument est refroidi a l’air de sorte que ses surfaces peuvent devenir chaudes pendant le
fonctionnement.
Lors de l’installation de l’instrument, laisser un espace de plus de 10 cm (4 pouces) autour de cet
instrument et ne placez aucun objet entre l’appareil et le mur.
N’installez pas l’instrument sur une pente ou un endroit soumis a des vibrations, ce qui induit le risque
de dysfonctionnement ou d’endommagement de l’instrument.
N’inserez jamais aucun objet dans les orifices d’aeration de l’instrument, car cela pourrait entrainer un
choc electrique, des blessures chez les utilisateurs et des dommages d’equipement.
Branchez le cordon d’alimentation fermement dans la prise murale et l’adaptateur secteur aussi.
Pour eviter un risque potentiel de commotion electrique, assurez-vous que le cordon d’alimentation est
correctement mis a la terre.
Assurez-vous de positionner l’instrument de telle sorte qu’il soit facile de debrancher l’instrument.
Eteignez l’instrument avant de debrancher le cordon d’alimentation et / ou de deplacer l’instrument.
Si l’instrument est casse ou qu’il soit tombe, debranchez le cordon d’alimentation et contactez un tech-
nicien de service. Ne demontez pas l’instrument et la garantie sera annulee en cas de demontage.
Utilisez uniquement les accessoires autorises (l’adaptateur, le cordon d’alimentation, et le lecteur USB).
WARNING
Le produit de classe A est conçu pour l’utilisation dans un environnement industriel.
Dans la documentation de l’utilisateur, la déclaration doit être incluse pour attirer
l’attention sur le fait qu’il peut y avoir des difficultés potentielles pour assurer la com-
patibilité électromagnétique dans d’autres environnements, en raison des perturba-
tions rayonnées et conduites par l’électricité.