5
2. Getting Started
2.1 Inserting Memory Card
Please note that the Micro SD card can only go into your device one way.
Attempting to install the card other than how it's described below will cause damage to either your card, device, or both.
Do not force your card into the slot. If force is required, it is likely that your card is in the wrong way. A correctly inserted card will
require you to use your finger nail to push the card into the slot until a click sound is heard/felt.
Instructions
Ensure that your NCP-DVRWIFI is not connected to any power. Position the Micro SD card with the text facing the front of the
camera. The gold contact ends of your memory card should always go into the slot first. Use your fingernail to press the card into
the slot until a click is heard.
Note:
1.
Do not insert or remove a Micro SD card while your NCP-DVRWIFI is powered up or recording. This may damage your Micro SD
card.
2.
Please use Class 10 rated Micro SD cards up to 32GB.
3.
Please format the Micro SD card before initial use (in FAT 32 format if you are using a computer to format your Micro SD card). The
card can also be formatted using the App.
4.
To quickly delete all items on your Micro SD card you can format the card in the settings menu of the App.
To remove the memory card
Ensure that your NCP-DVRWIFI is powered off. Using your fingernail press the SD card until a click is heard and release. The card
should eject from the slot. Please ensure you always handle your Micro SD Card with care.
2.2 Mounting you NCP-DVRWIFI
Please read through all mounting instructions for all components before you
attempt to mount your NCP-DVRWIFI.
It is recommended that you install the NCP-DVRWIFI in a position behind your
rear-view mirror, ensuring that your front driving view is not obstructed. Once you
have mounted your camera using your preferred method it is recommended that
you run the power cable around your windscreen under your vehicles interior trim
in the driver's side direction
