37
21.9 PROTECT LEVEL (GRAVITY SENSING)
The G Sensor defines the required force needed to trigger emergency recording. Once
Emergency recording is triggered the current recording will be saved and protected from
being saved over by the normal loop recording. To set the required sensitivity please follow the
instructions below.
1. Use the Up and Down Buttons to navigate the Settings Menu and highlight the Protect
Level setting and press
OK
(Rec/ Ok) to select.
2. Use the Up and Down Buttons to highlight either OFF/ HIGH/ MIDDLE/ LOW, then press
the
OK
(Rec/Ok) button to confirm your selection.
NOTE:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before
attempting to access the menu.
2. If your memory card is filling up quickly you may need to lower the sensitivity of the
G Sensor (Gravity Sensor) to decrease the number of triggers caused by normal driving.