17
13.0 USING THE CAR DVR
14.0 RECORDING VIDEO
When the Car DVR is connected to your vehicle’s 12v power supply, using the supplied 12v
adapter the Car DVR will automatically power up and begin recording when you start your
vehicle. During the start up the buttons will be unresponsive and the camera will take a moment
to begin recording. The Car DVR will automatically stop recording and shutdown when your
vehicle is powered off.
NOTE:
1. Because of how some vehicles are wired, the recording may continue when the engine
is switched off. If this happens, please manually turn off the Car DVR or remove the car
adapter from the cigarette lighter when not in use.
2. The recording loop length can be configured to save a video file for every 1,2,3,5 or 10
minutes of recording. For information on how to adjust this setting please refer to the Loop
Recording section of this manual.
3. The device saves the recorded footage and photos on to the inserted Micro SD Card. If the
memory card capacity is full, the oldest file in the memory card will be overwritten.