25
19.3 EXPOSURE
Exposure is used to manually control the light settings. To change the Exposure setting follow
the instructions below
1. Press the
OK
(Rec/Ok) Button to stop the Car DVR from recording.
2. Press the Button twice to enter the Photo Menu.
3. Use the Up and Down Buttons to navigate the Photo Menu and highlight the Exposure
setting and press
OK
(Rec/Ok) to select.
4. Use the Up and Down Buttons to highlight your required Exposure setting, then press
the
OK
(Rec/Ok) button to confirm your selection.
NOTE:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before
attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you are
in the Photo screen when you access the menu.
19.4 ISO SENSITIVITY
ISO is used to manage how much light is let into the image sensor. Setting a higher ISO will let
in more light and blurred movement and lower ISO will capture less movement and less light. To
change the ISO setting follow the instructions below.
1. Press the
OK
(Rec/Ok) Button to stop the Car DVR from recording.