
13
1. Once the Car DVR is securely installed on your vehicle’s
windscreen, plug the 12v Power Adapter into your vehicle’s
cigarette lighter.
2. Run the cable along your vehicle’s console and windscreen
and plug the USB Micro plug into the Car DVR.
NOTE:
1. It is recommended that the Car DVR is installed behind your vehicle’s rear view mirror.
2. Make sure that the camera view is not obstructed by any window tint or any other objects.
3. When removing the suction mount be sure to release the suction mount by switching the
suction latch to the down position.
8.0 POWERING THE CAR DVR ON / OFF
8.1 AUTO POWER ON/OFF
When the Car DVR is correctly installed and connected to your vehicle’s 12v power supply, the
Car DVR will automatically power up and start recording when the vehicle accessories are
activated.
8.2 MANUAL POWER ON/OFF AND RESET
8.3 MANUAL POWER ON
Hold the Power button on the top of the camera until the NanoCam Plus start up screen
appears.