17
The data inside this manual are not binding and they can be modified by the manufacturer without notice.
All rights reserved.
NPC 015 TO 230
For mains power input:
1.
Connect the machine (terminal
in the electrical panel) to the earth system of the building;
2.
Provide protection against direct contact of at least NEMA Type 1 upline from the power cable;
3.
Fit a device protecting the power cable from overcurrent (short-circuit) (see indication in the electrical diagram) upline from the
power cable. For this purpose, all protection devices must be homologated (“listed”).
4.
Use conductors which can carry the maximum current required at the maximum ambient operating temperature, according to the
type of installation chosen (seeindication in the electrical diagram). Use only UL marked copper cables, in conformity with NEC
(NATIONAL ELECTRICAL CODE) and CEC (CANADIAN ELECTRICAL CODE).
5.
After the connection to the circuit breaker/switch (as indicated in the wiring diagram), the unit’s power cable must exit the unit by
the appropriate hole positioned on the back panel and identified by a label with the indication of the power supply.
Summary of Contents for Precision NPC 015
Page 1: ...n psi C1 SM 01 01 US NPC 015 230 60 Hz UL SERVICE MANUAL...
Page 2: ......
