NANO NXC 0020, User Manual

Page: 9 / 64

9
cycling refrigerated air dryer
R
1
The “caution”
messages provide
warning about real
dangers and indicate the risks of minor injuries for
the operator, or damage to the system, products
(plates) and installations, if they do not strictly
adhere to the safety instructions provided to avoid
such dangers.
Caution labels generally have a yellow background.
! CAUTION
! CAUTEL
! MISE DE GARDE
Keep away from:
• Direct sunshine, rain, wind and sand.
• Temperature: max. 140°F/min. 14°F
• Max. relative humidity: 90%
1.9 storage
1.10 transport and handling
The carrier is always liable for any damage
caused to the products entrusted to them
during transport. Thus, before preparing the
unit for its installation and commissioning,
it is necessary to carry out a complete visual
inspection in order to check that the packing
cases are intact and the unit has no apparent
damage and that there is no oil or refrigerant
leakage. It is also important to verify that the
units are the ones that have been ordered.
Any damage or complaints must be reported
to nano-purification solutions and declared
to the carrier (or shipper) before the carrier
leaves premises when product is delivered.
If there is damage to one or more compo-
nents, do not start the unit but inform na-
no-purification solutions about the problem
to find a mutually agreeable course of action.
Preferably, remove the packaging at the actual
place of installation.
The unit should be handled with great care
on the premises. Do not use any of its compo-
nents as a grip. In order to avoid any damage,
it is imperative that, during their handling,
the units always remain in the position set for
their operation.
Do not leave the units in their packaging on
premises that are exposed to strong sunshine
because the ambient temperatures can affect
the triggering values of the safety devices.
The water circuit should be completely
drained before the unit is handled.
The equipment should be preferably lifted
using a forklift truck. Use a spreader bar if
belts or slings are used and ensure that there
is no pressure on the external edges of the
units or the packing case.