NANO NXC 0020, User Manual

Page: 5 / 64

5
cycling refrigerated air dryer
R
1
The installer must provide an emergency stop
button on the unit. They should ensure that
this is done before the unit is started.
The unit is equipped with protective covers
for the components. If the unit is installed
outdoors, it is important to arrange for a can-
opy to protect it from the snow, which could
constitute a risk while using the unit if the fan
blades freeze.
Replace all the supply lines of the different
power sources which are damaged or missing.
Depending on the version, the refrigerants
used can be either R407c or R134a. They are
not harmful unless inhaled. They constitute a
hazard only if they saturate the environment.
Some fluids are flammable under certain
conditions. Refer to the specifications of each
fluid on the safety data sheet at the end of
the manual.
This manual is meant for anyone who uses or works on the cycling refrigerated air dryer, mainly the
operators. The cycling refrigerated air dryer and this manual are protected by copyright. Any reproduction
of the same shall be liable for prosecution. All rights reserved by nano-purification solutions , particularly the
rights of reproduction and distribution, as well as translation, including those relating to charges of copyright
infringement. Any reproduction, processing, duplication, distribution of this document using electronic
or mechanical means without the prior written authorization of nano-purification solutions is strictly
prohibited. This document may have errors and is likely to be modified with respect to technical features.
All products are supplied with a 30 months manufacturer’s warranty from the date of shipment from the
factory or 24 months from date of installation/start up, whichever occurs first and installed and maintained in
accordance with the manufacturers guidelines. Pre-filters and non-corrosive upstream piping required. Only
genuine service parts should be used and no modifications made.
1.3 document introduction
1.4 warranty guidelines
1.5 general warnings
1.6 basic safety rules
Read the contents of this manual carefully
before starting the units.
This service and maintenance manual de-
scribes the design, operation and the instruc-
tions for use and maintenance of the units
manufactured by nano-purification solutions .
nano-purification solutions shall not be liable
for any damage caused due to non-compli-
ance with the instructions of this manual.
For the smallest doubts or any clarifications
that may be required, our qualified nano-puri-
fication solutions technicians are available to
provide all the necessary information.
In order to make it easier to identify the units,
it is important to always specify the technical
features, especially the serial number, which
are printed on the label on the outside of the
units.
The unit should not be operated, even for a
short period of time, under conditions other
than the ideal conditions.
A part that does not guarantee safety should
not be installed.
WARNING: This product can expose you to
chemicals including lead, which is known to
the State of California to cause cancer and/or
birth defects or other reproductive harm. For
more information, go to www.P65Warnings.