NANO NXC 0020, User Manual

Page: 19 / 64

19
cycling refrigerated air dryer
R
1
Modifying other parameters
Parameters access
• Press and hold SET button for 3 seconds until reach P5.
• Press the UP and DOWN arrows to scroll the list of available parameters.
• Press the SET button to show the relevant parameters value.
• Increase or decrease the parameters value by using the UP and DOWN arrows keys.
• Press the set button to memorize the parameters value and return to the parameters display.
• Follow the same procedure above to review all of the relevant parameters.
• Press and hold the set button for 3 seconds to memorize and lock in the parameters. The display will exit
the parameter setting menu. Note that if this last operation of holding the set button for 3 seconds is not
completed all changes to parameters will revert to previous values and modifications to parameters will
not be applied.
Parameters table
parameters description min max default unit
/4 Select probe display
(1)
1 3 1 -
/C1 Offset of probe 1
(2)
-50 50 0 °F
Set Set point 28 39 35 °F
P1 Duration of auto purge 0 999 2 Second
P2
Time interval between two auto
purges
0 999 1 Minute
P3 Short manual purge cycle 0 999 1 Minute
P4 Long manual purge cycle 0 999 0 Minute
(1)
In NXC dryers, probe 1 is only used. Do not change this parameter.
(2)
This offset allows taking into account the effects of heat transfer between the probe and the measured
environment. Do not change this parameter.