NANO GEN2-1110, User Manual

Page: 15 / 28

Page 15 17-110-0143
There are three levels of pass-code protection, these are User, Engineer and Distributor. To access Level 1
(User) select the menu button on the home screen, then select the login button. From there select ‘User from
the drop down menu and enter password ‘1234’.
Settings (Level 1 Access - Pass-code ‘1234’)
You are able to adjust the following:
- Purity Alarm
- Alarm Delay On - Alarm Delay Off
- ES Pressure Low - ES Pressure High - ES Stage Duration
- Inlet Pressure Low Setpoint - Alarm Delay On - Alarm Delay Off
- Outlet Pressure Low Setpoint - Alarm Delay On - Alarm Delay Off
- Outlet Pressure Alarm (on/off)
- Pressure Units (bar/psi)
Installation (Level 2 Access)
You are able to adjust the following:
- Installation date
- Commissioned by
- Company name of commisioning engineer
- Service interval
Service Details (Level 2 Access)
You are able to enter the following information:
- Contact name of prefered service provider
- Telephone number of prefered service provider
- Website of prefered service provider
Manual Overide (Level 2 Access)
You are able to manualy control the following valves:
-
Inlet A - Inlet B
- Exhaust A - Exhaust B
- N2 Vent - N2 Outlet
- O2 Isolate - Equalization Valve
- Dryer Contact
Customer (Level 3 Access)
You are able to adjust the following:
- Customer Name (Displayed on main screen)
- Purity Selection
- Replacement Build
Ensure the system is placed in to standby mode prior to entering the manual overide menu.