background image

Page 22 

17-110 -0143

12.  Warranty

All products are supplied with a 2 year manufacturer’s warranty from the date of purchase. The generator 
should be installed, operated and maintained in accordance with the manufacturer’s guidelines. Only genuine 
service parts should be used and no modifications made. For further information please contact your supplier.

CMS is expected to operate for 10 years or more without issue when high purity air is supplied to it. The 
integral dryers have a similar life expectancy. Provided the inlet air quality is maintained, the CMS and AMT 
dryers are warranted for 2 year. Care must be taken with air supplied from an oil lubricated compressor to 
keep its operating temperature low to minimize oil vapor. Where this is not possible an additional activated 
carbon adsorber must be used.

To claim under the warranty, the goods must have been installed and continually maintained in the manner 
specified in the User Guide. Our product support engineers are qualified and equipped to assist you in this 
respect. They are also available to make repairs that may become necessary in which event they will require 
an official order before carrying out the work. If such work is to be the subject of a warranty claim, the order 
should be endorsed for consideration under warranty.

13.  Service Record

GENERATOR SERVICE RECORD

PRODUCT CODE:

............................................................

PRODUCT SERIAL NO.

..........................................................................

HOURS  

SHOWN

DATE

SERVICED BY

(PRINT/SIGN)

NOTES

Installation Date:

Carried out by:

Summary of Contents for GEN2-1110





























Reviews: