31
Rotate the "right knob" to LINK, and press the "right knob" to enter the next level menu.
Rotate the "right knob" to select LINK, and press the "right knob" to set.
(5) UNLINK Setting
When the fixture needs to stop transmitting the CRMX wireless DMX signal, set the fixture to UNLINK. The setting method is the same as the UNLINK setting
on P28.
(4) Connect the fixture set in TRANSMITTER MODE with the fixture set in RECEIVER MODE.
In TRANSMITTER MODE, the signal from the DMX/RDM console or DMX-based APP will be transmitted to the fixtures set in RECEIVER MODE.
The fixtures set in TRANSMITTER MODE should be set as below:
RADIO MODE
RF OUTPUT POWER
LINK
LUMENRADIO ON/OFF
菜单
通道：512
连接中...
智能
按“MENU”键
LINKING...
MENU
CH: 512
SMART
PRESS “MENU” TO
MENU
LINK
UNLINK
CH: 512
SMART
PRESS “MENU” TO
MENU
LINK
UNLINK
CH: 512
SMART
PRESS “MENU” TO
MENU
CH: 512
SMART
PRESS “MENU” TO
