30
Rotate the "right knob" to RF OUTPUT POWER, and press the "right knob" to enter the next level menu.
Rotate the "right knob" to select 20dBm, 16dBm, 11dBm or 5dBm, and press the "right knob" to set.
The fixture can set the RF OUTPUT POWER when it is in TRANSMITTER MODE, the setting methods are as below:
(3) Set other fixtures that need to receive CRMX wireless DMX signals to RECEIVER MODE and set to UNLINK. (For setting method, please refer to P27.)
Note: The controlling range of Nanlink Bluetooth and 2.4G remote control will be shortened when set to TRANSMITTER MODE.
RADIO MODE
RF OUTPUT POWER
LINK
LUMENRADIO ON/OFF
MENU
20dBm
16dBm
11dBm
5dBm
CH: 512
SMART
PRESS “MENU” TO
MENU
20dBm
16dBm
11dBm
5dBm
CH: 512
SMART
PRESS “MENU” TO
SMART
PRESS “MENU” TO
SET
MENU
CH: 512
MENU
CH: 512
SMART
PRESS “MENU” TO
