17
①
Connect the light fixture to the console with RDM function using a 5-pin XLR connection cable, the connection method is the same as with a DMX512 console.
②
Control the fixture via a console with RDM function. (For specific operation methods, please refer to the RDM console operation manual.)
Note: The UID format of the fixture is as follows:
①
RECEIVER MODE
(1) RECEIVER MODE setting
3. 2.4G Remote Control
Set the address of the 2.4G remote controller to be consistent with the light fixture, enabling the Dyno 650C/1200C to be remotely controlled by 2.4G remote
controller or by Wi-Fi APP via the 2.4G transfer device.
Note: 2.4G remote controller and 2.4G transfer device are sold separately.
(See separate instructions for remote controller or 2.4G transfer device.)
4. RDM Remote Control
5. LUMENRADIO Remote Control
·
Dyno series has built-in CRMX TIMO TWO module, enabling it to receive or transmit CRMX wireless DMX signals.
Press the MENU key to access options.
MENU
CN: 512
CCT LIGHTING MODE
ADDRESS/DMX
LUMENRADIO SETTINGS
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
FULL
（
Left knob
）
（
Middle knob
） （
SELECT knob
）
0008
XXXX
XXXX
0101
：
Dyno 650C
0102
：
Dyno 1200C
Serial number
Manufacturer: Nanguang
