NANLUX Dyno 650C, Manual

Page: 36 / 68

34
④ FLASH
FLASH setting: Rotate ''SELECT knob'' to select COLOR. COLOR: CCT and HSI.
·
When COLOR is CCT, rotate ''SELECT knob'' to select CCT, G/M, INTERVALS (Range: 0.1S-10S), FLASH RATIO (Range: 0%-100%), PAUSE, then
rotate “middle knob” to set the parameters of the corresponding options.
·
When COLOR is HSI, rotate ''SELECT knob'' to select HUE, SAT, INTERVALS, FLASH RATIO, PAUSE, then rotate “middle knob” to set the parameters of the
corresponding options. (Same as CCT)
Note: PAUSE has two options: ON and OFF. When PAUSE is ON, the FLASH paused.
Rotate ''SELECT knob'' to select CCT, G/M, INTERVALS, FLASH RATIO, PAUSE.
Rotate “middle knob” to set the parameters of the corresponding options.
DIM: 100.0%
M/G: 00
EFFECT: FLASH
SPEED: 1.0S
PAUSE: OFF
EFFECT MODE
CN: 512
FLASH RATIO: 50%
COLOR: CCT CCT: 5600K
FULL
DIM: 100.0%
M/G: 00
EFFECT: FLASH
SPEED: 1.0S
PAUSE: OFF
EFFECT MODE
CN: 512
FLASH RATIO: 50%
COLOR: CCT CCT: 5700K
FULL
DIM: 100.0%
M/G: 00
EFFECT: FLASH
SPEED: 1.0S
PAUSE: OFF
EFFECT MODE
CN: 512
FLASH RATIO: 50%
COLOR: CCT CCT: 5600K
FULL
DIM: 100.0%
CCT: 5600K M/G: 00
EFFECT: FLASH
SPEED: 1.0S
PAUSE: OFF
EFFECT MODE
CN: 512
FLASH RATIO: 50%
COLOR: CCT
FULL