11
1. When the light is on, don't look direct at the emitter.
2. Don't place objects on the light emitter or allow liquid to flow inside the fixture or the emitter.
3. Don't place fixture near flammable substances like alcohol or gasoline.
4. When cleaning the fixture, please wipe off debris or dirt using cloth and only dampen with water or light cleanser.
5. The fixture should be placed in a well ventilated place and do not use in humid, dusty or overheated environment.
The temperature of the environment should not be higher than 40
℃
and do not use or store the fixture around
objects with high heating.
6. Do not repair the fixture yourself. Repair professionals, please adhere the user manual while troubleshooting.
7. When using the fixture for a long time, the temperature of the fixture is high, please pay attention to anti-scalding.
Notice
General Fault Detection and Diagnosis
Fault Detection
Diagnosis
The fixture won't boot up properly.
The fixture has an abnormal flicker.
1. Please check if the power adapter is normal and the voltage is
within the specified range.
2. Please check if there are any loose connection between the
adapter, power cord or port on fixture.
3. Please check if the LCD screen is on, if yes, please check if
the DIM shows zero or in "Storm" mode.
1. Please check if the adapter voltage is within the specified range.
2. Please check if there are any high temperature object near that
make the operational environment temperature too high.
The fixture turns on, but controller is not function.
Please check whether the address code setting of the fixture is
correct or not.
