9
ADDR:038
*
1
.
Master
2
.
Slaver
Battery：096%
TC-2700K
Dim:100%
038
S
HSI:236 SAT:095%
DIM:068%
038
S
OFF
CYCLE
MODE
:
1
CYC:12S
038
S
CYCLE
MODE
:
2
CYC:4S
038
S
CYCLE
MODE
:
3
CYC:
02S
038
S
(Note: The dimmer knob is used to adjust the saturation of the light. )
⑤
Adress option
is to set the address code for the fixture's wireless control.
(Note: The function knob is used to adjust the address code number from 001 to 100.)
⑥
Combine Control option
is for setting the master-slave mode.
Master mode allows this tube to control all other connected tubes.
(1)
Slave mode allows this tube to be controlled by master tube.
(2)
(Note: The function knob is used to select the option, then press MENU key to confirm the master-slave mode.)
⑦
Battery option
is for checking the capacity of the battery.
(Note: Select the Battery option and press ENTER key to check the capacity of the battery. )
3.
CCT Key: Press the CCT key to enter the operation interface of the CCT mode
.
4.
HSI Key: Press the HSI key to enter the opteration interface of the HSI mode .
Cycle mode 1,
a cycling period is 12 seconds;
Cycle mode 2,
a cycling period is 4 seconds;
Cycle mode 3,
a cycling period is from 2-16 seconds and
5.
ENTER Key: Press the ENTER key to release the selected option.
RGB Key: Press the RGB key to enter the opteration interface of the color cycle mode, continue to press to
6.
change the cycle mode.
(Note: To adjust the saturation via function knob when in cycle mode 1 and cycle mode 2, and adjust the cycle
time in cycle mode 3, the dimmer knob is used to adjust the brightness.)
user can customized the speed based on needs. Turn off the color cycle mode.
