© by N&W GLOBAL VENDING S.p.A.
30
03 - 2011 3685 00
PRICES
This function is active only if the machine has a
payment module.
From this menu it is possible to set the prices individually
(for each selection) or globally (the same price for all the
selections) and define the intervals of the promotional
band.
The machine can manage up to 4 different prices for
each selection, which can be active depending on the
time band that has been set (standard or promotional)
and/or on the payment system used.
PRICES
Individual price
Global price
Promotional band
ENGINEER> X.X
The prices are grouped in 4 lists and can be pro-
grammed (from 0 to 65,535), for each of the 4 lists, both
globally with the same price for all the selections and
individually for each selection.
The price of each selection can be varied also directly
from the keyboard.
In the event that most of the products are sold at the
same price it is more convenient to program the price
globally and then change the price of the selections
which have a different sales price.
bDv
,
ExEcuTivE
,
valiDaTors
With these systems, apart from the standard price list, it
is possible to manage a promotional price list if the time
band is enabled by means of the appropriate function.
The selections will be dispensed at the price of the pro-
motional list in all the set time intervals.
mDb
With these systems it is possible to establish whether to
use the 4 price lists at the same time or to use two bands
alternatively depending on the time band that has been
set.
If the time band is not used, apart from the standard
price list it is possible to manage three further price lists
depending on the type of cashless support used (key
1-3).
If the time band is used, the selections will be dispensed,
for the cashless system, at a price which is different from
the standard price; during the time intervals which have
been programmed, the selections will be dispensed with
two different promotional prices for the standard list and
for the cashless system.
p
romoTioNal
TimE
baND
Four time intervals can be programmed for sales at dif-
ferent prices.
The intervals can be set by the hour (from 00 to 23) and
by the minute (from 00 to 59).
To disable the time band, set the date, start and end
times of the band to 0.
The reference time is given by an internal clock which
can be adjusted from the configuration menu of the ma
-
chine (see the “DA Configuration” paragraph ).
DOSES
This group of functions allows you to define all the vari
-
ables which contribute to the preparation of the drink
DOSES
Selections parameters
Global powder doses
Dosers setting
Keyboard
Dec cycle
ENGINEER> X.X
s
ElEcTioN
paramETErs
By confirming this function, you can access the submen
-
us for managing the parameters; the first option is the
choice of the selection which you would like to change.
By pressing a key on the keyboard, the corresponding
parameters will be displayed, which will be different if the
key is a selection or a preselection.
s
ET
composiTioN
This group of functions allows you to modify the doses
and the parameters in relation to water and powder of
the chosen drink.
By confirming this function, the list of ingredients
(powder/s and water) of the drink is shown, listed in the
order in which the water dose is dispensed (see doses
table).
A drink can be composed of a maximum of 4 ingredients
(powder/s and water).
Each dose of water can be matched to more than one
powder.
The dispensing of water can be controlled through the
following parameters: