background image

 

 

Manual

    

EASY FLOW 

 

 

 

When working, the generator operator should wear buttoned clothing. Loose items 
of clothing can be caught in rotating items, which puts the operator at risk. 
 
 
 
 
The machine must not be moved backwards with the machine lowered. 
 
 

 

 
It is forbidden to transport people on the machine, as well as objects that are not 
the equipment of the aggregate. 
 

 

 
 
It is forbidden to leave the tractor cabin while the aggregate is moving. 
 
 
 
Before leaving the tractor, lower the machine to the ground, turn off the engine of 
the tractor and remove the key from the ignition. Do not leave the machine on a 
slope. 

 
 

 
 
It is forbidden to get between the tractor and the machine with the engine running 
and if it is not secured by applying the parking brake and placing wedges under 
the wheels. 

 
 

 
 
Operation of the aggregate is only permitted when the safety device is working 
properly. 
 

 
 

The manufacturer is not responsible for damage resulting from incorrect operation 
of the machine, incorrect or inaccurate adjustment, use of the machine contrary to 
its intended use, use of non-factory spare parts, introduction of changes in the 
structure by the user without consulting the manufacturer. 

 
 
 

 
If inscriptions and signs placed on the machine become damaged or illegible, they 
should be immediately replaced with new ones (ordered from the manufacturer or 
at the point of sale). 

 

Summary of Contents for EASY FLOW






















Reviews: